Compact CAN controller - universal and ideal for use in the automotive sector for applications as a decentralized function extension, as an independent PLC, as a monitoring unit or for data logging.

Inputs / outputs freely graphically programmable with CarsGraf ©.

Typical applications:
Control unit for central electrics, fuse monitoring, relay control, output / input expansions, connection of binary and analog sensors via CAN bus.

Inputs: up to 6
- 6 digital (optional 2 frequency inputs max. 10kHz) or 6 analog (0-30V, 10 (12) bit)

Output: up to 14
- 6 Open Collector 70mA
- 4 HSD 1A
- 2 Motor bridge 4A (or 4 HSD 2A or 4 Low Side 2A)

Intefaces:
- 1 CAN High Speed (CAN Low Speed or RS232 optional)

The ports IO1- IO6 can be used as inputs or outputs.

Switchable pull-up.
Internal temperature measurement.
Internal potentiometer.
Internal voltage measurement.
Overcurrent / overload detection motor bridge 1 & 2.

The motor bridges can also be used as individual high / low-side outputs.
There are separate connections for the power and logic supply voltage.

Programming can be done graphically or using a C development system. The range of functions (memory / register access or bus communication) can be restricted in graphic programming. Programming using a C development system requires both programming and hardware knowledge.

CAN bus high or low speed (other interfaces such as CANopen, SAE J1939, RS232 optional) Use as master, slave module or expansion (I / O).